How to Whitewash Trim

Posted by Anonymous , 9/5/2007 Tags:WhitewashTrim
Post By :
Anonymous
Rate:
Vote

How to Whitewash Trim

Introduction

Whitewashing, sometimes called pickling or liming, is an excellent way to add luster to the wood trim in your home or change the look completely, particularly to complement whitewashed furniture or cabinets. This traditional finish can be applied quickly and easily and give your wood trim a distinctive appearance.

Instructions

Difficulty: Moderate

Steps

1

Step One

Select a whitewash or pickling stain; consult manufacturer's guidelines for information about selecting and applying specific products.
2

Step Two

Prepare the surface by removing any paint or stain previously applied to the furniture and sand until smooth.
3

Step Three

Wipe the surface with a damp cloth to remove all traces of dust and sawdust.
4

Step Four

Use blue painter's tape to tape off the borders of the trim to protect the walls and ceiling.
5

Step Five

Apply the stain liberally using a foam brush or rag.
6

Step Six

Allow stain to penetrate the wood surface and then wipe off excess stain with a clean, dry cloth before it dries.
7

Step Seven

Apply additional coats of stain as needed to darken and enrich tones allowing to dry three hours between each coat.
8

Step Eight

Let the wood trim dry for 24 hours after the last application of stain.

Overall Tips & Warnings

  • Wipe off stain in the direction of the wood grain. Applying more pressure will result in lighter tones, less pressure will result in darker tones.
  • Work as a team with one of you applying stain and the other wiping excess stain to ensure a consistent finish.
  • Leftover stain and empty cans may harm the environment; contact your local hazardous materials coordinator for disposal information.

Overall Things You'll Need

  • Whitewash stain
  • Blue painter's tape
  • Rags or cloths
  • Sandpaper
  • Foam brush
  • Paint scraper
Tools: |