How to Refill Printer Ink - Inkjet refill process
Post By :
Anonymous
Rate:
Vote
How to Refill Printer Ink - Inkjet refill process
Introduction
The process of refilling inkjet cartridges in a simple step by step guide.
Instructions
Difficulty: Easy
Things You'll Need
- inkjet refill kit
- inkjet cartridge
- cloth to clean hands
Steps
1
Step One
To begin the inkjet refilling process, please remove all empty cartridges from your printer. Firmly attach a piece of tape to the bottom of each cartridge making sure that the "ink exit holes" are properly covered. The "filling holes" are located on the upper side of the ink cartridge. They can be found underneath the label.
2
Step Two
Use the tool provided in the kit to punch through and expose the recessed inkjet refill holes. Note: some cartridge sets have ball bearings instead. If this is the case, please push the bearing through the hole into the cartridge.
3
Step Three
Fill the provided syringe with the appropriate color of ink.
4
Step Four
Push it into the filling hole of the cartridge as far as it will go (making sure the tip has almost reached the bottom of the cartridge).
5
Step Five
Slowly inject the ink into the cartridge while withdrawing the needle from the refilling hole.
6
Step Six
It is time to stop when ink becomes visible at the top of the hole. Note: remove a small amount of ink from the cartridge so it is not flush with the top of the opening. Do not reseal the filling holes.
7
Step Seven
Remove the tape from the ink exit holes, and return the newly filled cartridges to the printer making sure to run 1-3 cleaning cycles, and print head alignment tools.
8
Step Eight
If you have a cartridge with a smart chip, it is important to reset the printer chip to ensure they function properly. This can be done with an Epson chip resetter...
Overall Tips & Warnings
- It is important to remember: When ink cartridges are empty they must be stored in an airtight bag with a damp cloth to prevent the ink distribution sponges from drying out.
- Cartridges cannot be refilled forever. For best results it is recommended to change your printer cartridges after every 5 refills.
- Be sure to avoid touching metal contacts on each cartridge when handling them. Static charges and can damage cartridges rendering them useless.
Relative Topics
- How to Get Tattooed on L.A. Ink
- How to Get Tattooed on Miami Ink
- How to Use the Decision Making Process
- How to Print Greeting Cards With an Inkjet Printer
- How to Properly Dispose of Fax Ink Cartridges
- How to Properly Maintain a Laser Printer
- How to Add a Laser Printer to an Office Network
- How to Clean a Laser Printer
Recommended Websites