How to Carve Using Soapstone

Posted by Anonymous , 9/4/2007 Tags:CarveUsingSoapstone
Post By :
Anonymous
Rate:
Vote

How to Carve Using Soapstone

Introduction

Soapstone is a type of metamorphic rock that consists mainly of an unrefined form of talc. It is very soft and easy to work. For that reason, sculpting experts suggest that beginning artists learn to carve using soapstone before moving on to harder rock like marble or limestone. Colors are dark and dull, usually gray or green. Soapstone gets its common name from the soapy texture inside. Another term for soapstone is steatite.

Instructions

Difficulty: Moderately Challenging

Learn to Carve Using Soapstone

Steps

1

Step One

Lay down newspapers on your work area to contain the amount of soapstone dust and shavings.
2

Step Two

Put on safety glasses and a dust mask before you begin to carve. Soapstone dust is not as dangerous as the silica in granite, but is still not healthy to inhale or ingest.
3

Step Three

Lightly sketch out your design on your stone, using a pencil.
4

Step Four

Use a small wood saw to cut unneeded sections from the stone. A keyhole saw or hacksaw blade work well for this job.
5

Step Five

Shape your sculpture with rasps and files of various sizes. These tools are used primarily for smoothing other types of stones but can be used to form shapes in a soft material like soapstone.
6

Step Six

Apply a wet/dry sand paper to your soapstone. Start with a 200 grit paper and work up to a grit in the range of 600. Change the water with each new grade of sand paper.
7

Step Seven

Heat your kitchen oven to 200 degrees F to warm your sculpture before polishing. Ten to 15 minutes is sufficient.
8

Step Eight

Rub furniture wax into your warmed soapstone, using a soft cloth. If you want some areas to appear darker than others, apply more wax to those sections.
9

Step Nine

Buff until you achieve the level of shine you prefer.

Overall Tips & Warnings

  • Soapstone is not appropriate to use for outdoor sculptures. Even normal weather conditions are too damaging for the delicate composition of soapstone and will lead to erosion.
  • Soapstone is a good choice of rock if you plan a sculpture with a high level of detailed carving.
  • You can use almost any kind of household wax or even vegetable oil to polish your stone. Experiment on small pieces to find out what finish works the best.
  • When heating your stone for polishing, be very careful not to burn yourself. Although the oven is set to only "warming" temperatures, the stone retains heat for a long time and will feel hotter than you would expect.

Overall Things You'll Need

  • Newspaper
  • Files
  • Furniture wax
  • Sandpaper
  • Dust mask
  • Rasps
  • Water
  • Soft cloth
  • Safety glasses
  • Oven
  • Wood saw
  • Pencil
Tools: |