How radar works?

Radar Dish
radar antennas, such as this one at London's Heathrow airport, enable air-traffic controllers to safely and efficiently direct [[KW]] airplanes [[/KW]] in flight. The shape of the dish is designed to focus radar waves into a beam that scatters off aircraft. The part of the beam that gets reflected is detected by the radar dish and gives important information about the airplane, such as its altitude, heading, and speed.
Science Source/Photo Researchers, Inc.

Radar relies on sending and receiving electromagnetic radiation, usually in the form of radio waves (see Radio) or microwaves. Electromagnetic radiation is energy that moves in waves at or near the speed of light. The characteristics of electromagnetic waves depend on their wavelength. Gamma rays and X rays have very short wavelengths. Visible light is a tiny slice of the electromagnetic spectrum with wavelengths longer than X rays, but shorter than microwaves. Radar systems use long-wavelength electromagnetic radiation in the microwave and radio ranges. Because of their long wavelengths, radio waves and microwaves tend to reflect better than shorter wavelength radiation, which tends to scatter or be absorbed before it gets to the target. Radio waves at the long-wavelength end of the spectrum will even reflect off of the atmosphere’s ionosphere, a layer of electrically-charged particles in the earth’s atmosphere.
A radar system starts by sending out electromagnetic radiation, called the signal. The signal bounces off objects in its path. When the radiation bounces back, part of the signal returns to the radar system; this echo is called the return. The radar system detects the return and, depending on the sophistication of the system, simply reports the detection or analyzes the signal for more information. Even though radio waves and microwaves reflect better than electromagnetic waves of other lengths, only a tiny portion—about a billionth of a billionth—of the radar signal gets reflected back. Therefore, a radar system must be able to transmit high amounts of energy in the signal and to detect tiny amounts of energy in the return.
A radar system is composed of four basic components: a transmitter, an antenna, a receiver, and a display. The transmitter produces the electrical signals in the correct form for the type of radar system. The antenna sends these signals out as electromagnetic radiation. The antenna also collects incoming return signals and passes them to the receiver, which analyzes the return and passes it to a display. The display enables human operators see the data.
All radar systems perform the same basic tasks, but the way systems carry out their tasks has some effect on the system’s parts. A type of radar called pulse radar sends out bursts of radar at regular intervals. Pulse radar requires a method of timing the bursts from its transmitter, so this part is more complicated than the transmitter in other radar systems. Another type of radar called continuous-wave radar sends out a continuous signal. Continuous-wave radar gets much of its information about the target from subtle changes in the return, or the echo of the signal. The receiver in continuous-wave radar is therefore more complicated than in other systems.